9
Introduction—First Steps
Attaching the Camera Strap
Attach the strap as shown below.
To remove the cover, hold the camera fi rmly and pull the
bottom of the cover gently outwards as shown at right.
The Monitor Cover
A clear plastic cover (the BM-6 LCD monitor cover) is pro-
vided with the camera to keep the monitor clean and
protect it when the camera is not in use. To attach the
cover, insert the projection on the top of the cover into
the matching indentation above the camera monitor (
햲
),
then press the bottom of the cover until it clicks into place
(
햳
).
To Next Page
Loading...
