85
Reference—Image Overlay and Multiple Exposure
5
Press the multi selector up or down to select a
value for gain between 0.1 and 2.0. The default
value is 1.0; selecting 0.5 cuts gain in half, while
selecting 2.0 doubles gain. The eff ects of gain
are visible in the preview image.
6
Press the multi selector left or right to highlight Image 2. Repeat steps 3–5
to select the second image and adjust gain.
7
Press the multi selector left or right to highlight
Overlay and press the button to display a
confi rmation dialog (to save the new image
without displaying the confi rmation dialog,
highlight Save and press the button). Press
the button to save the new image, or the
button to return to the preview dialog.
Selecting Photographs for Image Overlay
Only RAW photographs taken with the D200 can be selected for image overlay. Other
images are not displayed in the thumbnail list. Hidden images are not displayed and can
not be selected.
Image Overlay
The new image is recorded at current image quality, image size, and fi le name settings
under a fi le name assigned by adding one to the largest fi le number in the current folder.
White balance, sharpening, color space, color mode, and hue settings are copied from the
photograph selected for Image 1, as are the date of recording, metering, shutter speed,
aperture, exposure mode, exposure compensation, focal length, orientation, and other
photo information.
To Next Page
Loading...
Need help?
General
