Nikon D700 - Bracketing

Mirror up Mode
Choose this mode to minimize blurring caused by camera
movement when the mirror
is raised. Use of a tripod is
recommended.
1 Select mirror up mode.
Press the release mode dial
lock release and turn the
release mode dial
to Mup.
------- -----_. __ . __ ._ .. _----_._. __ ._--_ .. _-_ .. _._._._._---_ .. _ .. _---------_ ... __ .. _---
2 Raise the mirror.
Frame the picture, focus, and then press
the shutter-release button the rest of the
way
down to raise the mirror.
~ Using the Viewfinder
Note
that autofocus, metering, and framing can not be confirmed in
the viewfinder while mirror is raised.
3 Take a picture.
Press the shutter-release button all the
way
down again to take a picture. To
prevent blurring caused by camera
movement, press the shutter-release
button smoothly, or use
an optional remote cord (pg. 389). The mirror lowers when
shooting ends.
B Mirror up Mode
A picture will be taken automatically if no operations are performed for
about 30 safter the mirror is raised.
104