Using a
GPS
Unit
Optional Garmin
GPS
units
that
conform
to
version
2.01
or
3.01
of
the
National Marine Electronics Association NMEA0183 data
format
can be connected
to
the
camera's ten-pin remote terminal
using an MC-35
GPS
adapter cord (available separately; pg. 389),
allowing
information
on
the
camera's current position
to
be
recorded
when
photographs are taken. Operation
has
been
confirmed
with
Garmin eTrex and Garmin geko series devices
equipped
with
a
PC
interface cable connector. These devices
connect
to
the
MC-35 using a cable
with
aD-sub
9-pin connector
provided by
the
manufacturer
of
the
GPS
device.
See
the
MC-35
instruction manual
for
details. Before
turning
the
camera on, set
the
GPS
device
to
NMEA
mode
(4800 baud).
213
To Next Page
Loading...
