5 Select Done.
Highlight Done and press
€B).
The specified focal length and
[~..
~
aperture will be stored under
the chosen lens number. This
combination
of
focal length
and aperture
can
be recalled at any
time
by selecting the lens
number using camera controls
as
described below.
II
Choosing
a
Lens
Number
Using
Camera
Controls
1 Assign non-CPU lens
number
selection
to
a camera
control.
Select Choose non-CPU lens
number
as
the "+command
dials"
option
for a camera control in the Custom Settings
menu. Non-CPU lens number selection can be assigned
to
the
Fn
button
(Custom Setting f5, Assign FUNC. button, pg. 320),
the depth-of-field preview
button
(Custom Setting f6, Assign
preview button,
pg. 324), or the
AE-UAF-L
button
(Custom
Setting f7,
Assign AE-L/AF-L button, pg. 325).
iii 2
Use
the
selected control
to
choose a lens number.
Press
the selected
button
and rotate the main command dial
until the desired lens number
is
displayed in the control panel.
Focal
Maximum
length aperture
(~n~
"-----~
Lens
number
212
To Next Page
Loading...
Need help?
General
Weight and Dimensions
