Nikon D700 - Active D-Lighting

II Copying White Balance from d-O to Presets d-l-d-4
Follow the steps below to copy a measured value for white
balance from d-O to any of the other presets (d-1-d-4).
1 Select PRE (Preset manual).
Highlight Preset manual in the
white balance menu (pg. 140)
and press
~.
2 Select a destination.
Highlight the destination
preset
(d-1 to d-4) and press
the center of the multi
selector.
3 Copy d-O to the selected
preset.
Highlight Copy d-O and press
®. If comment has been
created for
d-O (pg. 158), the
comment will be copied to
the comment for the selected preset.
153