Nikon D700 - Page 420

2 Select an option.
Highlight one of the following
options and press
®.
,Automatic image sensor cleaning off.
". _, ··_···.··.·.." .. ""'~'w··'"····, .. ··_,,_"·._····_····_.·
Option Description
CI-"".~--·- :The image"sensorTs- au!o·rrla-ticaTlycleanecr--
ean a startup i each time the camera is turned on.
• ••• _ .' •• , •••••••• " ••• ~ •••••• ",_. • .. H .. ••• •• ···,_······
The image sensor is automatically cleaned
,during shutdown each time the camera is
turned off.
Clean at startup'TheTmage sensor iscTeaned automatically at
& shutdown startup and at shutdown.
Cleaning off
~
(default)
<i)IFF Clean at
shutdown
~ Image Sensor Cleaning
The following interrupt image sensor cleaning: raising the built-in flash,
pressing the shutter-release, depth-of-field preview, or
AF-ON button, or
using FV lock.
Cleaning
is performed by vibrating the image sensor. Ifdust can not be
fully removed using the options in the
Clean image sensor menu, clean
the image sensor manually (pg. 395) or consult a Nikon-authorized service
representative.
If image sensor cleaning
is performed several times in succession, image
sensor cleaning may be temporarily disabled
to protect the camera's
internal circuitry. Cleaning can be performed again after a short wait.
394