-
\_
':1:1-:/-\_,
iL
/ I I I \ / I \
Press
the shutter-release
button
all the way down.
The mirror will be raised and
the shutter curtain will open,
revealing the low-pass filter. The display in the viewfinder will
turn
off
and the row
of
dashes in the control panel will blink.
4
Raise
the
mirror.
5 Examine
the
low-pass filter.
Holding the camera
so
that
light
falls on
the low-pass filter, examine the filter for
dust
or
lint. If no foreign objects are
present, proceed
to
Step
7.
6 Clean
the
filter.
Remove any dust and
lint
from the filter
with
a blower. Do
not
use
a blower-
brush,
as
the bristles could damage
the
filter. Dirt
that
can
not
be removed
with
a blower can only be removed by Nikon-
authorized service personnel. Under no circumstances should
you touch or wipe the filter.
7 Turn
the
camera off.
The mirror will return
to
the
down
position and the shutter
curtain will close. Replace the lens or body cap.
396
To Next Page
Loading...
