.NETWORK. VI Basic Operations
4 Using the DS-L1 via a Network
- 102 -
Other settings
When enabling logon as an “anonymous” user
In order to discriminate the user by which image files are written to the FTP server, we in
the above settings adopted a method to log in with a user ID and a password. However, it
is possible to log in as an “anonymous” user.
1) When setting External Server in Network Settings of the DS-L1, select “anonymous”
for the User ID and “none” for the Password.
2) Enable the FTP server PC for anonymous access.
As in home directory settings, select the [Allow Anonymous Logon] check box on
the [Security Account] tab in the [Preset FTP Sites] properties window. Be aware
that if you select the [Allow Only Anonymous Logon] check box, no one but an
anonymous user can log on.
When specifying a directory in which to save image files separately for each of multiple
DS-L1s connected
1) Select [Computer Management (Local)] – [System Tools] – [Local Users and
Groups] – [Users].
2) Double-click the user you want to set, and specify a local path for the home folder
on the [Profile] tab. (The specified path should be below the home directory,
however.)
Example: If the home directory is “C:\DSFTP,” the user home folder local path of the
DS-L1 is “C:\DSFTP\DS1,” and the FTP Dir. on the DS-L1 side is “FTPIBOX,”
then the FTP transfer directory is “C:\DSFTP\DS1
\FTPIBOX\.”
3) Set local paths for the second and the third users (DS-L1s) as “C:\DSFTP\DS2” and
“C:\DSFTP\DS3.” That way, you can specify a separate directory for each user.
To Next Page
Loading...
Need help?
General
