Nikon LS4000 - Film that Can Not be Scanned in the SA-21; Film that Can Not be Used

102
Use the FH-3 film holder with the MA-20 (S) slide-
mount adapter.
Problem Solution
Use the FH-3 film holder with the MA-20 (S) slide-
mount adapter.
Film strip is only one frame long
Use the FH-3 film holder with the MA-20 (S) slide-
mount adapter.
Perforations are torn or missing
Pg. For more information on:
105 Using the FH-3
143 Optional accessories
Perforations Perforations
6 mm or more
Less
than
30 mm
Film has excessive curl
Film That Can Not Be Scanned in the SA-21
Film That Can Not Be Used
The following film can not be scanned in the SA-21.
Using scissors, cut the film into lengths of two to
six frames before scanning, or scan the film using
the optional SA-30 roll-film adapter (4000 ED only).
Film strip is more than six frames long.