En
2
Before Using Your Scanner
Connecting the Scanner
• Connect the scanner directly to the computer as described in “Connecting the Scan-
ner” ( 25). The scanner may not function as expected when connected to an IEEE
1394 hub.
• The scanner may not function as expected used with other IEEE 1394 devices. Should
you notice a problem with the scanner when used with other IEEE 1394 devices,
disconnect the other devices and use the scanner alone.
•Only one scanner can be connected to the computer at a time.
Using the Scanner with a Windows Computer
Before you will be able to use your scanner with a Windows computer, you must register the
scanner with the system.
Before registering the scanner, disconnect all other peripherals from the computer and connect
only the scanner.
To Next Page
Loading...
Need help?
General