25
Specifications
7
AZ100
Zoom Body
Magnification: 1x to 8x (zoom ratio, 8 : 1)
Aperture diaphragm: ø6 mm to ø20 mm
Zoom knobs: Right and left knobs are connected,
with the clickstop positions at integral magnifications
Slot: DIC prism slot
AZ-STE
Episcopic Stand
Substage: Stroke in the vertical direction: 10 mm
Coaxial coarse/fine focus knobs (torque is adjustable)
• Coarse focus: 37.7 mm per cycle
• Fine focus: 0.27 mm per cycle
Maximum weight of the specimen:
1 kg (for the AZ-STGE EPI stage)
Focus mounting section:
Stroke in the vertical direction: 85 mm
Coaxial coarse/fine focus knobs (torque is adjustable)
• Coarse focus: 18.5 mm per cycle
• Fine focus: 3.27 mm per cycle
AZ-STGE
EPI Stage
Stroke: 150 mm x 150 mm
Stage movement: Coarse focus: with the coarse/fine focus selector switch
Fine focus: vertically-arranged coaxial XY knobs
AZ-NPS
Single Nosepiece
Number of attachable objectives: One piece
Objective attachment screw: M38 x 1.25
AZ-NP3
Triple Nosepiece
Number of attachable objectives: Three pieces
Objective attachment screw: M38 x 1.25
AZ-TE80
Ergonomic Trinocular
Tube 80
and
AZ-TE100 Ergonomic
Trinocular Tube 100
Configuration: Trinocular eyepiece tube
(erect image trinocular eyepiece tube and vertical tube)
Optical path selector: Manual (lever pressing/pulling type)
• Binocular part 100% : Vertical tube 0% or
Binocular part 20% : Vertical tube 80% (AZ-TE80)
• Binocular part 100%: Vertical tube 0% or
Binocular part 0% : Vertical tube 100% (AZ-TE100)
Binocular part: Type: Siedentopf
Interpupillary adjustment: 50 mm to 75 mm
Diopter adjustment: use the adjustment function of the eyepiece
Vertical tube: Able to attach the C mount adapter
Magnification: Binocular part 1x, vertical tube 0.6x
Field number: Binocular part ø22, vertical tube ø11
General specification
With the following
configuration:
AZ100 Zoom Body
AZ-STE Episcopic Stand
AZ-STGE EPI Stage
AZ-NPS Single Nosepiece
AZ-NP3 Triple Nosepiece
AZ-TE80 Ergonomic
Trinocular Tube 80
External dimensions: 300 (width) x 427 (depth) x 637 (height) mm
(excluding protrusions such as those on the stage)
Weight: Approximately 20 kg
Operation condition: Temperature: 0 to +40°C
Humidity: 85% RH maximum (no condensation)
Altitude: 2000 m maximum
Pollution degree: Degree 2
Installation category: Category II
Storage condition: Temperature: -20 to +60°C
Humidity: 90% RH maximum (no condensation)