What to do if image is not in focus at lowest zoom on Nikon Multizoom AZ100 Microscope?
If the image is not in focus even when the zoom body is at its lowest position, the specimen position might be extremely low. Adjust the specimen position using the stage height adjustment knob.
What to do if image is not in focus at higher limit position on Nikon Multizoom AZ100 Microscope?
If the image remains out of focus even when the stage is at its highest position, the zoom body may be raised too high. Adjust the position of the zoom body using the focus knob.
General| Brand | Nikon |
|---|---|
| Model | Multizoom AZ100 |
| Category | Microscope |
| Language | English |
Details the warning and caution symbols used in the manual to indicate safety instructions.
Provides guidance on carefully handling, installing, and storing the microscope system.
Highlights the product as a precision instrument requiring careful handling to maintain accuracy.
Details environmental conditions for installation and storage to prevent damage and performance issues.
Describes how to operate the zoom knobs for magnification adjustment and total magnification calculation.
Details how to adjust zoom body height and stage height for focusing.
Illustrates the overall system configuration and interconnections of various components.
Provides instructions for installing the episcopic stand on a stable surface.
Details the procedure for attaching the EPI stage to the substage of the episcopic stand.
Guides on attaching the single or triple nosepiece to the zoom body or focusing mount adapter.
Explains how to attach the focusing mount adapter to the episcopic stand pillar.
Lists common image viewing problems, their causes, and corresponding countermeasures.
Addresses operational issues, their causes, and corrective actions for the microscope.
To Next Page
