Battery charging (flashes) Charging complete (steady)
Power cable: Af
t
er connecting the power cable with the plug in the orientation shown, insert the
battery and plug the cable in.
An exhausted battery will fully charge in about 2 hours and 35minutes.
D If the CHARGE Lamp Flashes Rapidly
If the CHARGE lamp flashes rapidly (8 times a second):
The battery was not inserted correctly: Unplug the charger and remove and reinsert the battery.
The ambient temperature is too hot or too cold: Use the battery charger at temperatures within
the designated temperature range (0–40°C/+32–104°F).
If the problem persists, unplug the charger and end charging. Bring the battery and charger to a
Nikon-authorized service representative.
76
Charging the Battery
To Next Page
Loading...
