nilan CTS602 LIGHT - Functional Testing Schedule; Test Documentation Requirements

33
Installation water trap with ball
It is important that the water trap complies with the measurements below. If the water trap is placed outside the climate screen, it
should be protected against frost.
Left model Right model
Glue the supplied fittings to the existing spout at the bottom
of the ventilation unit.
1. Water trap with Ø32 mm reducing fitting
2. Reducing fitting to Ø20 mm
3. Reducing fitting for 3/4” RG
4. Reducing fitting for 1/2”tube
Ø20 mm
Ø20 mm
Ø20 mm
Ø20 mm
100
90-225
Ø76
162
Ø32
Ø32
Ø32 Ø20
123