nilan VPL 28 User Manual

May be subject to change page 14 of 27
User select 2
User select 2 as user select
Time and speed must
be set in the same
way as described
under SELECT
EXTEND.
Required period in
which the selected
function is to remain
operative: stated in
hours and minutes.
Max 8 hours.
Switches user option
off.
Required ventilation
step: 1-4.
OFF allows the system
to be shut down via an
external switch.
TIME
FLOW
ENTER
ENTER
TEMP
TIME
00:00
FLOW
>4<
TEMP
23
ENTER
ENTER
ENTER
”00:00"
”OFF”
ENTER
ENTER
ENTER
°C
”>4<”
”23" °C
SELECT
SELECT
SELECT
SELECT
”EXTEND”
”INLET”
”EXHAUST”
SELECT
”EXTEND”
USER
SELECT
Required room temperature
(5-30°C).
T15 is the temperature sensor to
be used to control the system.
”EXT OFFS”
ENTER
SELECT
Choose the
afterrunning and
displacement of
the setpunkt, for
externak heating.
See SELECT
EXTEND
”VENTILAT”
ENTER
SELECT
Possibility to run at
a higher or lower
rate. High priority.
Figure 9: The ”User select 2" menu

nilan VPL 28 Specifications

General

Brand	nilan
Model	VPL 28
Category	Thermometer
Language	English