Nilfisk-Advance Advance SC750 ST

Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 88
Brush Motor
1. Remove the rear Scrub Brush.
2. Remove the Debris Hopper.
3. Remove the Brush Drive Belt.
4. Lower Brush Head.
5. Reconnect Baery Pack Connector.
6. Turn the key on, press the scrub switch and wait for brush head to lower.
7. Unplug Brush Head Actuator electrical connector, turn the key o and unplug the Baery Pack connector.
8. Remove the motor strap.
9. Remove the motor end mounng bolts.