FORM NO. 56043093 / Captor
™
4300, 4800, 5400 - 1
INTRODUCTION
This manual will help you get the most from your Advance rider Scrubber-Sweeper. Read it thoroughly before servicing the machine.
Note: Bold numbers and letters in parentheses and underlined indicate an item illustrated on pages 9-10 i.e. (B).
This product is intended for commercial use only.
PARTS AND SERVICE
Repairs, when required, should be performed by your Authorized Advance Service Center, who employs factory trained service personnel, and
maintains an inventory of Advance original replacement parts and accessories.
Call the ADVANCE DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing your
machine.
(Dealer, afx service sticker here.)
NAME PLATE
The Model Number and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering
repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future reference.
MODEL NUMBER
SERIAL NUMBER
HOPPER SAFETY SUPPORT
WARNING!
Make sure the Hopper Safety Support (KK)
is in place whenever attempting to do any
maintenance work under or near the raised
hopper. The Hopper Safety Support (KK) holds
the hopper in the raised position to allow work
to be performed under the hopper. NEVER rely
on the machine’s hydraulic components to safely
support the hopper.
JACKING THE MACHINE
CAUTION!
Never work under a machine without safety stands or blocks to support the machine.
• When jacking the machine, do so at designated locations (Do Not jack on the hopper) – see jacking locations (44).
GENERAL INFORMATION
To Next Page
Loading...
Need help?
General
