7
CONTROL PANEL (as shown in Figure 2)
36. Machine backward switch (B)
37. Tank safety cable
38. Battery connector (red).
39. Detergent tank filler plug (**)
40. Detergent tank (**)
41. Reference table for detergent proportioning (**)
42. Detergent pump (**)
43. Detergent tank - pump connecting hose (**)
44. Detergent feed hose (**)
45. Batteries
46. Battery caps
47. Flow increase switch
48. Flow decrease switch
49. Solution flow indicator
50. Safe switch
51. Discharged battery warning light (red)
52. Semi-discharged battery warning light (yellow)
53. Charged battery warning light (green)
54. Ignition key (0 - I)
55. Detergent flow control knob (**)
56. Speed adjuster (B)
57. Hour meter
58. Brush/pad-holder release switch
59. Vacuum system switch
60. Brush/pad-holder and vacuum system switch
61. Charging red LED
62. Charging yellow LED
63. Charging green LED
64. Security cover of charging jack
65. Overload protector of brush
66. Overload protector of traction (B)
67. Overload protector of vacuum
(*): Optional
(**): Only for machines with Chemical Mixing
System (optional)
(A): Only for machine without traction
DISPLAY WINDOW OF CHARGER INDICATON LIGHT (as shown in Figure 2)
1. At the beginning of charging, the red LED (61) of charger normally on. It is the first stage of charging.
2. After charging some time, the red LED (61) turns off, the yellow LED (62) turns on, this is the second stage of
charging.
3. After charging finish, the yellow LED (62) off, the green LED (63) turns on to indicate that the battery is fully
charged.
NOTE
When charging, if the yellow LED (62) of charger is on, it may be caused by: Battery and charger
does not match, battery is not connected well, or output is short-circuited.
The red LED of charger flashing may be caused by charger internal short circuit.
Figure 2
52 5351 5050
49
48
47
60 59 58
57
61 62 63
67 66 65 64
54
55
56
45
46
37
38
39
40
41
42
43
44
36
BRUSHTRACTION
VACUUM
To Next Page
Loading...
Need help?
General
