Your phone
4
The phone does not ring for
an incoming call or message
when Incoming call alert is
set to Off and Message alert
tone is set to Off. See ”Tone
settings” on page 55.
The alarm clock is set to On.
See ”Alarm clock (Menu 6)”
on page 57.
The countdown timer is
running. See ”Countdown
timer” on page 68.
The stopwatch is running in
the background. See
”Stopwatch” on page 68.
A GPRS dial-up connection
is established, refer to
”GPRS modem settings” on
page 75.
The GPRS connection is
suspended (on hold), for
example if there is an
incoming or outgoing call
during a GPRS dial-up
connection.
Infrared connection
indicator, see ”Infrared” on
page 74.
All your calls are diverted to
another number, Divert all
voice calls. If you have two
phone lines, the divert
indicator for the first line is
and for the second line
. See ”Call divert” on
page 50.
or If you have two phone lines,
the indicator displays the
selected phone line. See
”Line for outgoing calls” on
page 51.
The loudspeaker has been
activated, see ”Loudspeaker”
on page 13.
Calls are limited to a closed
user group. See ”Security
settings” on page 56.
The timed profile is selected.
See ”Profiles (Menu 4)” on
page 48.
, or
A headset, handsfree, or
loopset, is connected to the
phone.
To enable the phone to show the
time and date in standby mode, see
”Clock” and ”Date” on page 49.
To Next Page
Loading...
