Nokia 6108 - Restore Factory Settings; Alarm Clock (Menu 6); When the Alarm Time Expires; Gallery (Menu 7)

Menu functions
57
• Access codes to change the
security code, PIN code, PIN2
code or barring password. Codes
can only include numbers from 0
to 9.
Restore factory settings
To reset some of the menu settings
to their original values, press Menu,
and select Settings and Restore
factory settings. Key in the security
code and press OK.
■ Alarm clock
(Menu 6)
The alarm clock uses
the time format set for the clock.
Even when the phone is switched
off, the previously set alarm will still
work providing that there is enough
power in the battery.
Press Menu, and select Alarm clock.
•Select Alarm time, enter the
alarm time and press OK.
To change the alarm time, select
On.
•Select Alarm tone and select the
default alarm tone.
When the alarm time expires
The phone will sound an alert tone,
and flash Alarm! and the current
time on the display.
Press Stop to stop the alarm. If you
let the phone continue to sound the
alarm for a minute or press Snooze,
the alarm stops for about ten
minutes and then resumes.
If the alarm time is reached while
the phone is switched off, the phone
switches itself on and starts
sounding the alarm tone. If you press
Stop, the phone asks whether you
want to activate the phone for calls,
Switch the phone on?. Press No to
switch off the phone or Yes to make
and receive calls.
Note: Do not press Yes
when wireless phone use is
prohibited or when it may
cause interference or
danger.
■ Gallery
(Menu 7)
Note: Your
phone must be switched on
to use this function. Do not
switch the phone on when
wireless phone use is
prohibited or when it may
cause interference or
danger.