Menu functions
76
Note that your phone may have 
some pre-installed bookmarks for 
sites not affiliated to Nokia. Nokia 
does not warrant or endorse these 
sites. If you choose to access them, 
you should take the same 
precautions, for security or content, 
as you would with any Internet site.
With your phone’s multi-mode 
browser you can view the services 
that use Wireless Mark-up Language 
(WML) or extensible HyperText 
Markup Language (xHTML) on their 
pages. Since the phone’s display and 
the memory capacity are much 
smaller than in a computer, Internet 
content is displayed differently on 
the phone’s display. Note that you 
may not be able to view all pages or 
all details on the Internet pages. 
Basic steps for accessing and 
using services
1. Save the service settings that are 
required to access the service 
that you want to use. See page 
76.
2. Make a connection to the given 
service. See page 77.
3. Start browsing the pages of the 
service. See page 78.
4. Once you are finished browsing, 
end the connection to the 
service. See page 79.
Setting up the phone for a 
service
You may receive the service settings 
as an OTA message from the network 
operator or service provider that 
offers the service that you want to 
use. You can also key in the settings 
manually or add and edit the 
settings with PC Suite.
For more information and for 
appropriate settings, contact your 
network operator or service provider 
that offers the service that you want 
to use. The settings may be available, 
for example, on their website.
Saving the service settings 
received as an OTA message
When you receive the service 
settings as an OTA message, Service 
settings received is displayed.
• To save the received settings, 
press Options and select Save.
If no settings are saved in Active 
service settings, the settings are 
saved under the first free 
connection set and are also 
activated.
If there are settings saved in 
Active service settings, Activate 
saved service settings? will be 
displayed. To activate the saved 
settings, press Yes, or to save 
them only, press No.
• To view the received settings 
first, press Options and select