Menu functions
43
Select Call cost limit to limit the 
cost of your calls to a certain 
amount of charging units or units 
of currency. The PIN2 code is 
required for the call cost settings.
Note: When no more 
charging units or 
currency units are left, 
calls may only be 
possible to the 
emergency number 
programmed into your 
phone (e.g. 112, or other 
official emergency 
number).
• GPRS data counter Scroll to 
check the amounts of data that 
were sent or received in the last 
session, data sent and received in 
total, and to clear the counters. 
The counter unit is a byte. The 
security code is required to clear 
the counters.
• GPRS connection timer Scroll to 
check the approximate duration 
of the last GPRS connection or 
the total GPRS connection. You 
can also clear the timers. To clear 
the timers, the security code is 
required.
■ Contacts 
(Menu 3)
You can save names and phone 
numbers in the phone’s memory 
(internal contacts) and in the SIM 
card’s memory (SIM contacts).
• The internal contacts may save 
up to 500 names with numbers 
and text notes about each name. 
The number of names that can be 
saved depends on the length of 
the names, and the number and 
length of the phone numbers and 
text items.
• The phone supports SIM cards 
that can save up to 250 names 
and phone numbers. Names and 
numbers saved in the SIM card’s 
memory, are indicated by  .
Contacts settings
Press Menu and select Contacts and 
Settings. Select
• Memory in use to select the 
contacts you want to use. To find 
names and numbers from both 
phone and SIM card, select 
Phone and SIM. The names and 
numbers will be saved in the 
phone’s memory.
• Contacts view to select how the 
names and numbers in the 
contacts are displayed.