Nokia 6108 - 3. Call Functions; Basic Call Handling

Call functions
10
3. Call functions
■ Make a call
1. Key in the phone number, or get it
from your contacts (See ”Search
for a name in the contacts” on
page 45).
For international calls
1
, press
twice for the international
prefix (the + character replaces
the international access code
2
)
and then key in the country code,
the area code without the
leading 0, if necessary, and the
phone number.
2. Press to call the number.
3. Press to end the call or to
cancel the call attempt.
■ Answer a call
You can answer a incoming call
through the following ways:
• Press .
• Open the flip cover of the phone
to answer a voice call. Refer to
”Flip call handling” on page 50.
•Press Silence to mute the ringing
tone. Then press Options, and
select Answer to answer the call.
• When a compatible headset is
connected to the phone, press
the button on the headset to
answer the call.
■ Reject a call
•Press .
•Press Silence to mute the ringing
tone. Then press Options, and
select Reject to reject the call.
Tip: If the Divert if busy
function is activated, rejecting
a call will also divert the call.
Refer to ”Call divert” on page
50.
■ End a call
•Press .
• Close the flip cover of the phone
to end a voice call. Refer to page
50.
1. Note that some calls between the regions of one country (for example, in China
between mainland provinces and Hong Kong Special Administrative Region) are also
considered international calls.
2. Depending on your operator, you may still be able to use the international access code
(network services).