Nokia 6108 - Making a Connection to a Service

Menu functions
77
View. To save the settings, press
Save.
• To discard the received settings,
press Options and select Discard.
Keying in the service settings
manually
1. Press Menu, and select Services,
Settings and Connection
settings.
2. Select Active service settings.
3. Scroll to the connection set you
would like to activate and press
Activate.
You need to activate the
connection set where you want
to save the service settings. A
connection set is a collection of
settings required to make a
connection to a service.
4. Select Edit active service
settings.
Select each of the settings one by
one and key in all the required
settings according to the
information you have received
from your network operator or
service provider. Note that under
Data bearer menu you may
choose GSM data or GPRS as the
data bearer, and that all the
bearer-related settings are in the
Bearer settings menu.
For availability and subscription
to data services, contact your
network operator or service
provider.
Making a connection to a
service
1. Firstly, make sure that the service
settings of the service you want
to use are activated. To activate
the settings:
•Press Menu, and select
Services, Settings and
Connection settings. Select
Active service settings and
scroll to the connection set
you want to activate and
press Activate.
2. Secondly, make a connection to
the service. There are three ways
to connect:
• Open the startpage, for
example, the homepage of the
service provider:
Press Menu, and select
Services and Home, or in
standby mode press and hold
.
• Select a bookmark of the
service:
Press Menu, and select
Services, Bookmarks, and
select a bookmark.
If the bookmark does not work
with the current active service
settings, activate another set
of service settings and try
again.