Menu functions
51
Automatic redial
Press Menu, and select Settings,
Call settings and Automatic redial.
Select On, and your phone will make
a maximum of ten attempts to
connect the call after an
unsuccessful call attempt
(Depending on the network
environment).
Speed dialling
Press Menu, and select Settings,
Call settings and Speed dialling.
Select On and the names and phone
numbers assigned to the speed
dialling keys, from to ,
can be dialled by pressing and
holding the corresponding number
key.
Call waiting
Press Menu, and select Settings,
Call settings and Call waiting.
Select Activate and the network will
notify you of an incoming call while
you have a call in progress (network
service). See ”Handle a waiting call”
on page 12.
Summary after call
Press Menu, and select Settings,
Call settings, and Summary after
call. Select On. After each call, the
phone briefly displays the
approximate duration and cost of
the call (network service).
Send my caller identity
Press Menu, and select Settings,
Call settings and Send my caller ID.
Select Yes and your phone number
will be displayed to the person you
are calling (network service). Select
Set by network and the setting
agreed upon with your service
provider is used.
Line for outgoing calls
Line for outgoing calls is a network
service to select the phone line 1 or
2, that is, the subscriber number, for
making calls.
Press Menu, and select Settings,
Call settings and Line for outgoing
calls. If you select Line 2 and have
not subscribed to this network
service, you will not be able to make
calls. However, calls on both lines
can be answered regardless of the
selected line.
If supported by your SIM card, you
can prevent the line selection by
selecting the option Lock.
For more information on availability,
contact your network operator or
service provider.
Tip: In standby mode, you can
switch from one line to the
other by pressing and holding
.
To Next Page
Loading...
