Menu functions
48
Press Menu and select Contacts and 
Caller groups and select the desired 
caller group. Select
• Group name, enter a new name 
for the caller group and press OK.
• Group ringing tone and select 
the ringing tone for the group. 
Default is the ringing tone 
selected for the currently active 
profile.
• Group logo and select On to set 
the phone to display the group 
logo, Off not to display it, or View 
to view the logo.
• Group members to add a name to 
the caller group, press Options 
and select Add contact. Scroll to 
the name you want to add to the 
group and press Add.
To remove a name from a caller 
group, scroll to the name you 
want to remove, and press 
Options and select Remove 
contact.
■ Profiles 
(Menu 4)
Your phone has 
various setting groups, profiles, for 
which you can customise the phone 
tones for different events and 
environments. Initially, personalise 
the profiles to your own liking and 
then you only need to activate a 
profile to use it. Available profiles 
are General, Silent, Meeting, 
Outdoor, and Pager.
Press Menu, and select Profiles. 
Scroll to a profile and press Select.
• To activate the selected profile, 
select Activate.
• To set the profile to be active for 
a certain amount of time up to 24 
hours, select Timed and set the 
end time. When the time set for 
the profile expires, the previous 
profile that was not timed, 
becomes active.
• To personalise the profile, select 
Personalise. Select the setting 
you want to change and make 
the changes. The same settings 
can also be changed in the Tone 
settings menu, see ”Tone 
settings” on page 55.
To rename a profile, select Profile 
name. The General profile can 
not be renamed.
Tip: To change the profile 
quickly in standby mode, 
press the power key  , 
scroll to the profile you want 
to activate and press Select.