Menu functions
69
Time observation and time
splitting
1. Press Menu, and select Extras,
Stopwatch and Split timing. You
can select Continue if you have
set the timing in the background.
2. Press Start to start the time
observation. Press Split every
time you want to take an
intermediate time. The
intermediate times are listed
below the running time on the
display. Scroll to view the times.
3. Press Stop to stop the time
observation.
4. Press Options and select
Start to start the time
observation again. The new time
is added to the previous time.
Save to save the time. Enter a
name for the measured time and
press OK. If no name is keyed in,
the total time is used as the title.
Reset to reset the time without
saving it.
Lap times
Press Menu, and select Extras,
Stopwatch and Lap timing. Press
Start to start the time observation
and Lap to take a lap time. Press
Stop to stop the lap timing. Press
Options and you can save or reset
the lap times. Refer to ”Time
observation and time splitting”
above.
Viewing and deleting times
Press Menu, and select Extras, and
Stopwatch.
If the stopwatch is not reset, you can
select Show last to view the most
recent measured time. Select View
times and a list of names or final
times of the time sets is shown,
select the time set you want to view.
To delete the saved times, select
Delete times. Select Delete all and
press OK, or select One by one, scroll
to the times you want to delete,
press Delete and press OK.
Wallet
In Wallet you can save personal
information, for example, credit card
numbers and make purchases with
your phone where the functionality
is supported (network service).
You can access wallet via the Wallet
menu or via the WAP browser, see
”Options while browsing” on page
78.
When you access wallet for the first
time, you need to create your own
wallet code. At Create wallet code:
key in the code and press OK to
confirm it and at Verify wallet code:
key in the code again and press OK.
To Next Page
Loading...
