34 Copyright © 2008 Nokia. All rights reserved.
Navigator
To add a waypoint to a navigation in progress:
1 Search and select a waypoint from the list of results or
from the map view.
2 Select Navigate via. If there is no intermediary
waypoint defined for the trip, the navigation continues
automatically.
If an intermediary waypoint has been defined, a
confirmation query is displayed. To continue the
navigation with the new waypoint, select Yes, or to
continue the navigation with the old waypoint, select
No.
Alarms
To receive a visual or acoustic alarm when approaching a
certain location, select Options > Settings > Alarm and
the category to which the location belongs. For example,
select Points-of-interest and mark the the desired
subcategories.
Set road blocks
To avoid a certain part of the planned route when
navigating, select Options > Define road block and the
distance for which you want to set the road block.
To define the part to be avoided in the Route description
view, select Select from list.
Browse the map
When not navigating, you can use the Navigator
application to browse the map, and search places and
locations (for example, by address). A GPS signal is not
required when browsing the map.
View location information
To view a searched item and information about it on the
map view, select the item from the list and Show on map.
Information can also be viewed by scrolling to the desired
location on the map, selecting it and Show information.
To call to a number of a selected location, select Call. To
use the call function, select the item from the list of search
results or in the map view.
Send and save location information
To send location data (such as a map as an image), route
itinerary, or your current GPS position to a compatible
device, select Options > Send and the data to be sent. The
information channel depends on the data, for example, a
map as an image can be sent as a multimedia or e-mail
message or through a Bluetooth connection.
To Next Page
Loading...
