Nokia 6110 - Device Settings - Phone General; General Phone Settings

Copyright © 2008 Nokia. All rights reserved. 75
Settings
To activate a new voice command for an application, select
Options > New application and the application. To play
the activated voice command, select Options > Playback.
To use voice commands, see "Voice dialing", p. 24.
Phone settings
General
Select Menu > Settings > Phone sett. > General >
Personalisation, Date and time, Slide handling,
Enhancement, Security, Factory settings, Positioning, or
My own key.
Personalisation
Select Display, Standby mode, Tones, Language, Themes,
or Voice comms..
Display
Light sensor — to adjust the light sensor that observes the
lighting conditions and adjusts the brightness of the
display
Font size — to select the font size used in lists and editors
Power saver time-out — to set the time-out period after
which the power saver is activated
Welcome note / logo — to set the welcome note or logo
which is displayed briefly each time you switch on the
device.
Light time-out — to set the time-out for the display light
Standby mode
Active standby — to enable or disable active standby. See
"Active standby", p. 19.
Active standby apps. — to select the application shortcuts
to appear in the active standby. This setting is available
only if Active standby is set to On.
Shortcuts — to assign shortcuts for the right and left
selection keys, scrolling in different directions or pressing
the scroll key in the standby mode. The scroll key shortcuts
are not available if Active standby is On.
Operator logo — this setting is visible only if you have
received and saved an operator logo. You can select
whether the operator logo is shown.
Tones
Change the tones of the clock, calendar and currently
active profile. See "Profiles", p. 73.
Language
Phone language — to change the language for the display
texts in your device. This change may also affect the
format used for date and time and the separators used, for
example, in calculations. If you select Automatic, the