Nokia 6110 - Page 76

76 Copyright © 2008 Nokia. All rights reserved.
Settings
device selects the language according to the information
on your SIM card. After you have changed the display text
language, the device restarts.
Writing language — to change the writing language of
your device. Changing the language affects the characters
and special characters available when writing text and the
predictive text dictionary used.
Predictive text — to set predictive text input On or Off for
all editors in the device. Select a language for entering
predictive text from the list.
Themes
Apply themes. See "Themes", p. 74.
Voice commands
Edit voice command and voice dialing settings. See "Voice
commands", p. 74.
Date and time
Time and Date — to set the time and date.
Time zone — to set the time zone of your location. If you
set Network operator time > Auto-update, the local time
is shown.
Date format — to select the format to display dates.
Date separator — to select the date separator.
Time format — to select between 24-hour and 12-hour
time format.
Time separator — to select the time separator.
Clock type — to select whether the analog or digital clock
is shown in the standby mode. See "Clock", p. 66.
Clock alarm tone — to select the alarm clock tone.
Workdays — to specify days for alarms repeated only on
workdays.
Network operator time (network service) — to allow the
network to update time, date, and time zone information
to your device. If you select Auto-update, all active
connections are disconnected. Check any alarms as these
may be affected.
Slide handling
Opening the slide — to select whether incoming calls are
answered when opening the slide, select Answer incoming
call or Call not answered.
Closing the slide — to select whether active calls are
ended when closing the slide, select End active call or
Continue active call.
Keyguard activation — to select whether the keypad is
locked when closing the slide, select On when closing
slide or Off when closing slide. To receive a query every
time when closing the slide, select Always ask.