Copyright © 2008 Nokia. All rights reserved. 19
Your phone
To change the profile, press the end key, and select a
profile.
To open the list of last dialed numbers, press the call key.
To start a connection to the web, press and hold 0.
Active standby
When active standby is enabled, you can use the display for
fast access to frequently used applications. To select
whether the active standby is shown, select Menu >
Settings > Phone sett. > General > Personalisation >
Standby mode > Active standby > On or Off.
To access active standby applications, scroll up or down,
then scroll to the application, and select it. In active
standby the default applications are shown across the top
of the active standby area, and calendar, to-do, and player
events are listed below. To select an application or event,
scroll to it, and select it.
Indicators
The device is connected to a UMTS network.
The HSDPA (network service) in UMTS network is
activated.
The device is connected to a GSM network.
The device is in offline mode and not connected
to a cellular network.
The GPS receiver is active.
You have received one or several messages to
the Inbox folder in Messaging.
You have received new e-mail in your remote
mailbox.
There are messages waiting to be sent in
Outbox. See "Outbox", p. 43.
You have missed calls. See "Recent calls", p. 29.
Shown if Ringing type is set to Silent and
Message alert tone and E-mail alert tone are
set to Off. See "Profiles", p. 73.
The device keypad is locked. See "Keypad lock
(keyguard)", p. 21.
The loudspeaker is activated.
An alarm is active.
The second phone line is being used. See Line in
use in "Call", p. 79.
/
All calls to the phone are diverted to your call
mailbox or to another number. If you have two
phone lines, the divert indicator is for the
first line and for the second.
To Next Page
Loading...
