90 Copyright © 2008 Nokia. All rights reserved.
Connectivity
Synchronisation type — Select Both ways for
synchronization of the data on your device and the
remote database, To phone only for the
synchronization of the data on your device only, or To
server only for the synchronization of the data on the
remote database only.
4 Define the Connection settings:
Server version, Server ID, Data bearer, Host address,
Port, User name, and Password — Contact your service
provider or system administrator for the correct
settings.
Access point — Only visible if Internet is selected as
Data bearer. Select an access point you want to use for
the data connection.
Allow sync requests > Yes — to allow that the server
starts the synchronization
Accept all sync requests > No — to require a
confirmation before the server starts the
synchronization
Network authentication — Only visible if Internet is
selected as Data bearer. To use HTTPS authentication,
select Yes, and enter user name and password in
Network user name and Network password.
Synchronize data
In the main view, scroll to a profile, and select Options >
Synchronise. The status of the synchronization is shown.
After synchronization is complete, select Options > View
log to open a log file showing the synchronization status
(Complete or Incomplete) and how many calendar or
contact entries have been added, updated, deleted, or
discarded (not synchronized) in the device or on the server.
Connection manager
Select Menu > Settings > Connectivity > Conn. mgr..
In the connection manager, you can identify the status of
multiple data connections, view details on the amount of
data sent and received, and end unused connections.
Note: The actual invoice for calls and services
from your service provider may vary, depending
on network features, rounding off for billing,
taxes, and so forth.
View connection details
Scroll to a connection, and select Options > Details.
End connections
To end a connection, scroll to the connection, and select
Options > Disconnect.
To end all connections, select Options > Disconnect all.
To Next Page
Loading...
