44 Copyright © 2008 Nokia. All rights reserved.
Messaging
Message centre in use — defines which message centre is
used for delivering text messages and special message
types such as business cards.
Character encoding > Full support — to select all
characters in the message to be sent as viewed. If you
select Reduced support, characters with accents and
other marks may be converted to other characters.
Receive report (network service) — When set to Yes, the
status of the sent message (Pending, Failed, Delivered) is
shown in Reports.
Message validity — If the recipient of a message cannot
be reached within the validity period, the message is
removed from the message service centre. Note that the
network must support this feature.
Message sent as — to define how the message is sent. The
default is Text.
Preferred connection — You can send text messages using
the normal GSM network or packet data if supported by
your network.
Reply via same centre (network service) — If you select
Yes, and the recipient replies to your message, the return
message is sent using the same message service centre
number. All networks do not provide this option.
Multimedia messaging settings
Select Menu > Messaging > Options > Settings >
Multimedia message and from the following options:
Image size — Define the size of the image in a multimedia
message. If you select Original, the image is not scaled.
MMS creation mode — If you select Guided, the device
informs you if you try to send a message that may not be
supported by the recipient. To set the device to prevent you
from sending messages that are not supported, select
Restricted. If you select Free, message creation is not
restricted, but the recipient may not be able to view your
message.
Access point in use — Select which access point is used as
the preferred connection for multimedia messaging.
Multimedia retrieval — To receive multimedia messages
only when you are in your home network, select Auto in
home netw.. To always receive multimedia messages,
select Always automatic. To retrieve messages manually,
select Manual. To not receive any multimedia messages or
advertisements, select Off.
Allow anon. msgs. — To reject messages coming from an
anonymous sender, select No.
Receive adverts — Define whether you want to allow
reception of multimedia message advertisements.
Receive report — If you want the status of the sent
message (Pending, Failed, or Delivered) to be shown in
To Next Page
Loading...
