Copyright © 2008 Nokia. All rights reserved. 69
Applications
Applications
GPS data
To start the GPS data application, select Menu >
Applications > GPS data.
Navigation
To use route guidance, select Navigation.
Route guidance shows the straightest route and the
shortest distance to the destination. Any obstacles, such as
buildings and natural obstacles, are ignored. Differences in
altitude are not taken into account when calculating the
distance. Route guidance is active only when you move.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or enter
the latitude and longitude coordinates. Select Stop
navigation to clear the set destination.
To view the position information of your current location,
select Position.
Position
To save your current location as a landmark, select Options
> Save position.
Trip distance
Select Trip distance > Options > Start to activate trip
distance calculation and Stop to deactivate it. The
calculated values remain on the display.
Select Reset to set the trip distance, time, average and
maximum speeds to zero and to start a new calculation.
Select Restart to set also the odometer and total time to
zero.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
Position requests
You may receive a request from a network service to
receive your position information. Service providers may
offer information about local topics, such as weather or
traffic conditions, based upon the location of your device.
When you receive a position request, a message is
displayed showing the service that is making the request.
To allow your position information to be sent, select
Accept; to deny the request, select Reject.
To Next Page
Loading...
