Copyright © 2008 Nokia. All rights reserved. 25
Call functions
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are
dependent on the speaker's voice.
• You must say the name exactly as you said it when you
recorded it.
• Voice tags are sensitive to background noise. Record
voice tags and use them in a quiet environment.
• Very short names are not accepted. Use long names,
and avoid similar names for different numbers.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you
should not rely solely upon voice dialing in all
circumstances.
1 In the standby mode, press and hold the my own key. A
short tone is played, and Speak now is displayed.
If you are using a compatible headset with the headset
key, press and hold the headset key.
2 Speak the voice command clearly. The device plays the
voice command of the best match. After 1.5 seconds,
the device dials the number; if the result is not the
correct one, before dialing, scroll to another entry.
Using voice commands to carry out a device function is
similar to voice dialing. See "Voice commands", p. 74.
Make a conference call (network
service)
1 Make a call to the first participant.
2 To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3 To join the first participant in the conference call when
the new call is answered, select Options > Conference.
• To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
The device supports conference calls between a
maximum of six participants, including yourself.
• To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant and Private. The conference call
is put on hold on your device. The other participants
can still continue the conference call. To return to
the conference call, select Options > Add to
conference.
• To drop a participant, select Options > Conference
> Drop participant, scroll to the participant, and
select Drop.
4 To end the conference call, press the end key.
Answer or reject a call
To answer a call, press the call key.
To Next Page
Loading...
