Boot Options
170
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
4.10.3.6.5 7210 SAS-Mxp Console Port
The 7210 SAS-Mxp is a non-blocking, service-aware IP/MPLS switch that supports
the SR OS with 64Gbps (full-duplex) of switching capacity. It is available in two
variants: Standard (Standard operating temperature range), and ETR (Extended
Temperature Range). The 7210 SAS-Mxp can be operated in standalone or satellite
mode.
The 7210 SAS-Mxp ETR CC (Conformal Coating) variant is conformally coated to
provide additional protection against environmental contaminants that cause
corrosion of the components when the platform is deployed in harsh environments.
The 7210 SAS-Mxp ETR CC includes a -48V DC power supply. It supports an
extended operating range of –40° to 149°F (–40° to 65°C) and includes two PoE/
PoE+ ports.
Figure 17 shows an example of the console port on a 7210 SAS-Mxp front panel.
Figure 17 Front Panel: 7210 SAS-Mxp Console Port
4.10.3.6.6 7210 SAS-Sx 1/10GE Console Port
The 7210 SAS-Sx 1/10GE is an IP/MPLS Ethernet device for business service
applications and Ethernet mobile backhaul applications to be used as an access
device or as an access aggregation device. It can also be operated in satellite mode,
where it provides port expansion, allowing users to break out the 10GE ports on the
7x50 to 1GE ports.
7210 SAS-Sx 1/10GE is available in six variants:
• 7210 SAS-Sx 1/10GE 46F 2C 4SFP+
• 7210 SAS-Sx 1/10GE 22F 2C 4SFP+
• 7210 SAS-Sx 1/10GE 48T 4SFP+
• 7210 SAS-Sx 1/10GE 24T 4SFP+
• 7210 SAS-Sx 1/10GE 48Tp 4SFP+ PoE
• 7210 SAS-Sx 1/10GE 24Tp 4SFP+ PoE
To Next Page
Loading...
Need help?
General
