7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Boot Options
Edition: 01 3HE 16132 AAAB TQZZA 211
Description This command configures the primary DNS server used for DNS name resolution. DNS name
resolution can be used when executing ping, traceroute, and service-ping, and also when
defining file URLs. DNS name resolution is not supported when DNS names are embedded
in configuration files.
The no form of this command removes the primary DNS server from the configuration.
Default no primary-dns
Parameters ip-address — The IP address of the primary DNS server.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
secondary-dns
Syntax secondary-dns ip-address
no secondary-dns [ip-address]
Context bof
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures the secondary DNS server for DNS name resolution. The
secondary DNS server is used only if the primary DNS server does not respond.
DNS name resolution can be used when executing ping, traceroute, and service-ping, and
also when defining file URLs. DNS name resolution is not supported when DNS names are
embedded in configuration files.
The no form of this command removes the secondary DNS server from the configuration.
Default no secondary-dns
Parameters ip-address — Specifies the IP address of the secondary DNS server.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
tertiary-dns
Syntax tertiary-dns ip-address
To Next Page
Loading...
Need help?
General
