Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 273
Notes:
1. Operating in standalone mode
2. Supported only on fixed copper port
3. Supported only on copper variants
4. Supported only on combo ports with connection-type copper port
5. Supported on fixed copper port (either combo port configured for copper operation or copper port)
6. Supported only when T1/E1 CES MDA is used in network mode. Available only for distributing
recovered clock to T1/E1 ports. Cannot be used for system clock reference.
7. PTP hybrid mode recommended for use
8. Supports two BITS ports configured as input or output
9. Supports one BITS port (that is, BITS1), configured as input or output
10. 1pps and 10MHz output available only when PTP is used as a reference for the system clock
Table 31 Synchronization Options for 7210 SAS Platforms
Synchronization Options 7210 SAS Platforms
7210 SAS-M 7210 SAS-T 7210 SAS-S 1/10GE 7210 SAS-R6 7210 SAS-R12 7210 SAS-Mxp
1
7210 SAS-Sx 1/10GE
1
7210 SAS-Sx 10/100GE
1
SyncE with SSM (1GE and 10G/E fiber ports) ✓✓✓✓✓✓✓✓
SyncE with fixed copper ports (Master and Slave
support)
✓
2
✓
3
✓✓
✓
4
✓
5
Adaptive Clock Recovery (ACR)
✓
6
1588v2/PTP with port-based timestamps (both for
frequency and time – also called PTP pure mode)
✓
7
✓✓✓✓✓
1588v2/PTP with port-based timestamps (time only
with SyncE or BITS (if supported) used for
frequency recovery – also called PTP hybrid mode)
✓
7
✓ ✓✓✓ ✓
PTP end-to-end (E2E) transparent clock ✓✓
BITS
✓
8
✓
9
✓
9
✓
1pps and 10MHz interfaces
✓
10
✓
10
✓
10
✓
10

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English