Nokia 7210 SAS-M User Manual

System Management
432
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
shutdown
Syntax [no] shutdown
Context config>system>ptp>port
Supported
Platforms
7210 SAS-M, 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12
Description This command disables or enables a specific PTP port. When shut down, all PTP Ethernet
messages are dropped on the IOM. They are not counted in the PTP message statistics. No
PTP packets are transmitted by the node toward this port.
If the clock-type is ordinary slave or boundary, and PTP is not shut down, the last enabled
port cannot be shut down. This prevents the user from having PTP enabled without any
means to synchronize the local clock to a parent clock.
This command only applies if the profile is set to g8275dot1-2014.
Default no shutdown
Special Cases PTP Protocol Handling — Applies only to 7210 SAS-Mxp. When the first instance of
the PTP protocol is created and the no shutdown command is issued in the base
routing instance, resources are allocated to enable CPU processing of the protocol.
The resources are deallocated when the last instance is removed from the
configuration using the shutdown command.
priority1
Syntax priority1 priority-value
no priority1
Context config>system>ptp
Supported
Platforms
7210 SAS-M (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12,
7210 SAS-Sx 1/10GE, 7210 SAS-T (network and access-uplink)
Description This command configures the priority1 value of the local clock. This parameter is only used
when the profile is set to ieee1588-2008 or This command configures the priority1 value of
the local clock. The command applies only if the profile is set to ieee1588-2008. This value
is used by the BMCA to determine which clock should provide timing for the network. It is also
used as the advertised value in Announce messages and as the local clock value in data set
comparisons.This value is used by the BMCA to determine which clock should provide timing
for the network
The no form of this command reverts to the default value.
Default 128

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English