Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 433
Parameters priority-value — Specifies the value of the priority1 field.
Values 0 to 255
priority2
Syntax priority2 priority-value
no priority2
Context config>system>ptp
Supported
Platforms
7210 SAS-M (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12,
7210 SAS-Sx 1/10GE, 7210 SAS-T (network and access-uplink)
Description This command configures the priority2 value of the local clock. This parameter is only used
when the profile is set to ieee1588-2008 or g8275dot1-2014. This value is used by the BMCA
to determine which clock should provide timing for the network. It is also used as the
advertised value in Announce messages and as the local clock value in data set
comparisons.
The no form of this command reverts to the default value.
Default 128
Parameters priority-value — Specifies the value of the priority2 field.
Values 0 to 255
profile
Syntax profile {g8265dot1-2010 | ieee1588-2008 | g8275dot1-2014}
Context config>system>ptp
Supported
Platforms
7210 SAS-M (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12,
7210 SAS-Sx 1/10GE, 7210 SAS-T (network and access-uplink)
Description This command configures the profile to be used for the internal PTP clock. This principally
defines the BMCA behavior.
The profile cannot be changed unless PTP is shut down.
When the profile is changed, the domain is changed to the default value for the new profile.
A change of profile requires a reboot of the node on some 7210 SAS platforms. See
Configuration Guidelines and Restrictions for PTP for more information.
Default ieee1588-2008
Parameters g8265dot1-2010 — Keyword to conform to the ITU-T G.8265.1 specification.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English