Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 453
time-range time-range-name — Specifies a name for the time-range, up to 32
characters. If the time-range is not populated the system will assume the assignment
to mean “all times”. Only one entry without a time-range is allowed for every type of
policy. The system does not allow the user to specify more than one policy with the
same time-range and priority.
priority priority — Specifies the priority of the time-range. Only one time-range
assignment of the same type and priority is allowed.
Values 1 to 10
mac mac-filter-id — Specifies a MAC filter for this tod-suite.
Values 1 to 65535
qos
Syntax qos policy-id [time-range time-range-name] [priority priority]
no qos policy-id [time-range time-range-name]
Context config>system>cron>tod-suite>ingress
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command creates time-range based associations of previously created QoS policies.
Multiple policies may be included and each must be assigned a different priority; in case time-
ranges overlap, the priority will be used to determine the prevailing policy. Only a single
reference to a policy may be included without a time-range.
The no form of this command reverts to the default.
Parameters policy-id — Specifies an egress QoS policy for this tod-suite.
Values 1 to 65535
time-range time-range-name — Specifies a name for the time-range, up to 32
characters. If the time-range is not populated the system will assume the assignment
to mean “all times”. Only one entry without a time-range is allowed for every type of
policy. The system does not allow the user to specify more than one policy with the
same time-range and priority.
Default "NO-TIME-RANGE" policy
priority priority — Specifies the priority of the time-range. Only one time-range
assignment of the same type and priority is allowed.
Values 1 to 10
Default 5

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English