Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 461
Parameters start-week — Specifies the starting week of the month when the summer time will take
effect.
Values first, second, third, fourth, last
Default first
start-day — Specifies the starting day of the week when the summer time will take effect.
Values sunday, monday, tuesday, wednesday, thursday, friday, saturday
Default sunday
start-month — Specifies the starting month of the year when the summer time will take
effect.
Values january, february, march, april, may, june, july, august, september,
october, november, december
Default january
hours — Specifies the hour at which the summer time will take effect.
Values 0 to 23
Default 0
minutes — Specifies the number of minutes, after the hours defined by the hours
parameter, when the summer time will take effect.
Values 0 to 59
Default 0
zone
Syntax zone [std-zone-name | non-std-zone-name] [hh [:mm]]
no zone
Context config>system>time
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command sets the time zone and time zone offset for the device.
The OS supports system-defined and user-defined time zones. The system-defined time
zones are listed in Table 28.
For user-defined time zones, the zone and the UTC offset must be specified.
The no form of this command reverts to the default of Coordinated Universal Time (UTC). If
the time zone in use was a user-defined time zone, the time zone will be deleted. If a dst-
zone command has been configured that references the zone, the summer commands must
be deleted before the zone can be reset to UTC.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English