Nokia 7210 SAS-M - Page 479

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 479
Default the primary configuration file location
detail — Keyword to save both default and non-default configuration parameters.
index — Keyword to force a save of the persistent index file regardless of the persistent
status in the BOF file. The index option can also be used to avoid an additional boot
required while changing your system to use the persistence indexes.
enable-tech
Syntax [no] enable-tech
Context admin
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command enables the shell and kernel commands.
tech-support
Syntax tech-support file-url
Context admin
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command creates a system core dump.
usb-flash-id — uf1: (7210 SAS-M, 7210 SAS-T,
7210 SAS-Mxp, 7210 SAS-Sx 1/10GE:
standalone and standalone-VC, and
7210 SAS-Sx 10/100GE)
uf1:, uf1-A:, uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cflash-id — cf1:, cf2: (7210 SAS-T, 7210 SAS-Mxp,
7210 SAS-Sx 10/100GE, and 7210 SAS-Sx/
S 1/10GE: standalone and standalone-VC)
cf2:, cf2-A:, cf2-B: (7210 SAS-R6 and
7210 SAS-R12)
Note: This command should only be used with authorized direction from the Nokia
Technical Assistance Center (TAC).