Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 495
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description This command initiates a configuration rollback revert operation that will return the
configuration state of the node to a previously saved checkpoint. The rollback revert
minimizes impacts to running services. There are no impacts in areas of configuration that
did not change since the checkpoint. Configuration parameters that changed (or items on
which changed configuration have dependencies) are first removed (revert to default) and the
previous values are then restored (can be briefly service impacting in changed areas).
Parameters checkpoint | rescue — Specifies the rollback checkpoint or rescue file to revert to.
Values rescue — The rollback rescue file from the configured rescue
location.
latest-rb — The most recent rollback checkpoint file from the
configured rollback location, with the suffix *.rb.
checkpoint-id — The ID value of a specific rollback checkpoint file
from the configured rollback location with the suffix *.rb.x. The range
is 1 to 9 but the maximum value depends on the local and remote
max checkpoints. See local-max-checkpoints and remote-max-
checkpoints for more information.
now — Keyword to force a rollback reversion without prompting for confirmation.
save
Syntax save [comment comment] [rescue]
Context admin>rollback
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description This command saves the current operational configuration as a rollback checkpoint file at the
configured rollback location, using the filename specified by the rollback-location
command, with the suffix *.rb. The suffixes of all previously saved rollback checkpoint files
are automatically incremented by one (*.rb becomes *.rb.1, *.rb.1 becomes *.rb.2, and so on).
If the optional rescue keyword is not used, this command saves a rollback checkpoint at the
location and with the filename specified by the rollback location with a suffix of ".rb". The
previously saved checkpoints will have their suffixes incremented by one (.rb.1
becomes.rb.2, etc). If there are already as many checkpoint files as the maximum number
supported, the last checkpoint file is deleted.
By default, there can be a maximum of 10 rollback checkpoint files, the latest with suffix *.rb
and nine older files with suffixes *.rb.1 through *.rb.9. If the maximum number of checkpoint
files is reached and a new one is saved, the oldest checkpoint file is deleted. The maximum
number of rollback checkpoint files that can be saved can be configured with the local-max-
checkpoints and remote-max-checkpoints commands.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English