7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 497
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description This command configures the maximum number of rollback checkpoint files when the
rollback location is on the local compact flash.
Default 10
Parameters 1..50 — Specifies the maximum number of rollback checkpoint files.
remote-max-checkpoints
Syntax remote-max-checkpoints [1..200]
no remote-max-checkpoints
Context config>system>rollback
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description This command configures the maximum number of rollback checkpoint files that can be
saved on a remote device.
Default 10
Parameters 1..200 — Specifies the maximum number of rollback checkpoint files.
rescue-location
Syntax no rescue-location file-url
Context config>system>rollback
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description The location and filename of the rescue configuration is configurable to be local (on the
compact flash) or remote. The suffix “.rc” will be automatically appended to the filename when
a rescue configuration file is saved. Trivial FTP (tftp) is not supported for remote locations.
A valid rescue location must be configured before a rescue configuration is saved.
rollback-location
Syntax no rollback-location file-url
Context config>system>rollback