System Management
498
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description This command configures the location and generic filename of the rollback rescue
configuration file.
A rescue file can be saved locally on the compact flash or on a remote device. The file URL
must not contain a suffix, just a path/directory and filename. The suffixes for rollback
checkpoint files are “.rb”, ".rb.1", ..., ".rb.9" and are automatically appended to rollback
checkpoint files.
A valid rollback-location must be configured before a rollback save command is executed.
Parameters file-url — Specifies the local or remote file path for the rollback rescue configuration file.
Values file-url — local-url | remote-url
local-url — [cflash-id/] [file-path]
255 chars maximum, including cflash-id
directory length 99 characters maximum each
remote url — [{ftp://} login:password@remote-location] [file-path]
255 characters maximum
directory length 99 characters maximum each
remote-location — [hostname | ipv4-address | ipv6-address]
ipv4-address — a.b.c.d
ipv6-address — x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x — 0 to FFFF (hexadecimal)
d — 0 to 255 (decimal)
interface — 32 characters maximum, for link
local addresses
cflash-id — cf1:, cf2
usb-flash-id — uf1:
6.12.2.1.14 Peer Commands
peer
Syntax peer ip-address [create]
no peer ip-address
Context config>redundancy>multi-chassis
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document
To Next Page
Loading...
