7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 499
Description This command configures a multi-chassis redundancy peer.
Parameters ip-address — Specifies a peer IP address. Multicast address are not allowed.
Values a.b.c.d
create — Keyword to create the configuration context.
authentication-key
Syntax authentication-key authentication-key | hash-key [hash | hash2]
no authentication-key
Context config>redundancy>multi-chassis>peer
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document
Description This command configures the authentication key used between this node and the multi-
chassis peer. The authentication key can be any combination of letters or numbers.
Parameters authentication-key — Specifies the authentication key. Allowed values are any string up
to 20 characters composed of printable, 7-bit ASCII characters. If the string contains
special characters (#, $, spaces, and so on), the entire string must be enclosed within
double quotes.
hash-key — Specifies the hash key. The key can be any combination of ASCII characters
up to 33 (hash1-key) or 55 (hash2-key) characters (encrypted). If spaces are used in
the string, the entire string must be enclosed within double quotes.
hash — Specifies that the key is entered in an encrypted form. If the hash or hash2
parameter is not used, the key is assumed to be in a non-encrypted, clear text form.
For security, all keys are stored in encrypted form in the configuration file with the
hash or hash2 parameter specified.
hash2 — Specifies that the key is entered in a more complex encrypted form that
involves more variables then the key value alone, this means that hash2 encrypted
variable cannot be copied and pasted. If the hash or hash2 parameter is not used,
the key is assumed to be in a non-encrypted, clear text form. For security, all keys
are stored in encrypted form in the configuration file with the hash or hash2
parameter specified.
6.12.2.1.15 MC-LAG Commands
mc-lag
Syntax [no] mc-lag