7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 505
vlan-id
Syntax vlan-id 0..4094
no vlan-id
Context config>system>lldp>lldp-med>network-policy
Supported
Platforms
7210 SAS-Sx/S 1/10GE: standalone and standalone-VC
Description This command configures the VLAN ID for the network policy.
The no form of this command reverts to the default value.
Default vlan-id 0
Parameters 0..4094 — Specifies the VLAN ID.
Values 0 to 4094
vlan-tag-present
Syntax [no] vlan-tag-present
Context config>system>lldp>lldp-med>network-policy
Supported
Platforms
7210 SAS-Sx/S 1/10GE: standalone and standalone-VC
Description This command configures the application specified by the application-type to use a VLAN
tagged packet, using the configured VLAN ID in the VLAN tag.
The no form of this command disables the use of a VLAN tag.
Default no vlan-tag-present
message-fast-tx
Syntax message-fast-tx time
no message-fast-tx
Context config>system>lldp
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures the duration of the fast transmission period.
To Next Page
Loading...
Need help?
General
