Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 527
The no form of this command removes all resources allocated to MAC authentication; further
attempts to enable MAC authentication on an Ethernet port using the mac-auth command
will fail unless resources are first reallocated using the mac-auth-res command. The no form
of the mac-auth-res command cannot be executed when MAC authentication is enabled on
at least one port.
Default no mac-auth-res
Parameters num-resources — Specifies the number of resources to allocate for MAC authentication.
Configuring a value of 0 is equivalent to configuring no mac-auth-res and effectively
disables MAC authentication.
Values 0 to 1
g8032-control-sap-tags
Syntax [no] g8032-control-sap-tags vlan-range
Context configure>system>resource-profile
Supported
Platforms
7210 SAS-Sx/S 1/10GE: standalone and standalone-VC, 7210 SAS-R6, 7210 SAS-R12
Description This command configures the range of VLANs per IMM to be used internally with G8032
MEPs that support hardware CCM message processing.
Use one of the VLANs configured with this command to configure the VLAN for the G8032
MEP configure>eth-ring>path>eth-cfm>mep>control-sap-tag.
Default no g8032-control-sap-tags
Parameters vlan-range — Specifies the range of VLANs per IM.
Values start-vlan — 3000 to 3512 (7210 SAS-R6 and 7210 SAS-R12)
512 to 768 (7210 SAS-Sx 1/10GE:standalone and
standalone-VC)
end -vlan — 3000 to 3512 (7210 SAS-R6 and 7210 SAS-R12)
512 to 768 (7210 SAS-Sx 1/10GE:standalone and
standalone-VC)
Note: Users must ensure that the VLANs configured for use with G8032 MEPs are not
configured for any of the SAPs configured on the IMM.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English